Quicking Biotech Co., Ltd.
Main products:boline brulella altest,salmonella test,cpv+ccv agtest
Products
Contact Us
  • Contact Person : Mr. Tang Spark
  • Company Name : Quicking Biotech Co., Ltd.
  • Tel : 86-21-50947188
  • Fax : 86-21-50947186
  • Address : Shanghai,Pudong,3F, Production Building, No. 1998, South Yanggao Road
  • Country/Region : China
  • Zip : 200125

Sulfadimethoxine Rapid Test (Honey)

Sulfadimethoxine Rapid Test (Honey)
Product Detailed
Quicking Sulfadimethoxine Rapid Test has lower price but nearly the same quality compared to that made by European or USA.

Sulfadimethoxine Rapid Test (Honey)

Cat No.: W81032-1

1.        INTENDED USE

Quicking Sulfadimethoxine Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Sulfadimethoxine residue in honey sample.

Cut-off:   10 ppb

Assay Time:  10 - 15 min

2.        PRINCIPLE OF THE ASSAY

Quicking Sulfadimethoxine Rapid Test is based on competitive lateral flow immunochromatographic assay. The Sulfadimethoxine conjugate in the test zone will capture the immuno-gold (colloid gold- Sulfadimethoxine antibody conjugate), when there is very little dissociative Sulfadimethoxine in the samples. A visible red test band indicates a negative result when the control line (C zone) shows that the card is valid. The test band (T zone) will be not visible if Sulfadimethoxine is present in concentration of 10 ppb and above which explains a positive result.

3.        KIT COMPONENT

-           10×foil pouches each containing one cassette and a desiccant

-           10×assay buffer (0.75 mL each) 

-           20×pipettes

-           1×plastic canister contained 10 microwells and a desiccant

-           Products Manual

4.        TEST PROCEDURE

-           Add 0.25 mL of honey sample into an assay buffer tube and mix well. If there is crystal, thaw the sample in a water bath (60-80°C) beforehand.

-           Take out the microwells strip from the plastic canister. Take one well and tear off the film.

-           Suck 0.2 mL of the extract into the well with another pipette (the reticle level is 0.2 mL content). Repeatedly suck and extrude the sample until all red reagents are completely dissolved. Wait for 1 min.

-           Take out the cassette from the foil pouch and place it horizontally.

-           Suck the mixture in the well and gradually drop 3 drops into the assay sample hole “S”.

-           Interpret the result in 10-15 min. Result after 15 min is considered as invalid.

5.        INTERPRETATION OF RESULTS

Positive: Only one clear band in C zone C indicates a positive result. If a vague T band can be seen but apparently weaker than C band, we also consider it as a positive result. Positive shows that the concentration of Sulfadimethoxine is above 10 ppb (ng/mL) in the sample.

Negative: The presence of both clear bands in C zone and T zone. (T band is close to or stronger than C band.)

Invalid: No colored band appears in C zone.

6.        SPECIFICITY

The results are negative when the test card is applied to detecting 100 ppm (μg/mL) of Chloramphenicol, Aminoglycosides, Beta-lactams, Fluoro quinolones, and Macrolides.

7.        STORAGE

The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the package label. DO NOT FREEZE. Do not store the test kit in direct sunlight.

8.        PRECAUTIONS

-           For best results, please strictly adhere to these instructions.

-           All reagents must be at room temperature before running the assay.

-           Do not remove test cassette from its pouch until immediately before use.

-           Do not reuse the test kit.

-           Do not use the test beyond its expiration date marked on the foil pouch.

-           The components in this kit have been quality control tested as standard batch unit. Do not mix components from different lot numbers.

9.        LIMITATION

Quicking Sulfadimethoxine Rapid Test is a useful tool offering a rapid and accurate testing in field screening, exceeding with its convenience. It provides a semi-quantitative method to detect the Sulfadimethoxine above 10 ppb in honey samples. If you want a quantitative result, please adopt other method such as ELISA/ HPLC in practice.

Sulfadimethoxine Rapid Test (Honey)



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.